Register
Hybrid SAF installation. (photo: Matthew Nichol Photography)
Hybrid SAF installation.
29.04.2020, 13:43

Keeping Wastewater Treatment within Consent

Energy, Water & Waste, United Kingdom
Andrew Baird, technical director for environmental wastewater consultancy WPL, explains why robust wastewater treatment is essential for conforming with new Zero Pollutions requirements from the Environment Agency (EA) in the UK.

 

With the Environment Agency making its Zero Pollutions expectations clear to the UK's water industry, there has never been greater need for efficient and effective wastewater treatment systems.

 

The regulator’s toughening approach to discharge permit breaches, a number of high profile prosecutions and record fines for polluters, along with increased public awareness, means customers are also demanding more from their water utilities. While much of the EA’s scrutiny has been directed at the water sector – in 2019, it told the industry to clean up its act and protect the environment from pollution, it is clear that all companies with onsite treatment are coming under increasing pressure to have reliable processes in place.

 

A breach of trade effluent consent, which is granted by water companies to companies that discharge into the public sewer, is a criminal offence and penalties can range from an early warning notice to a fine or prosecution or, in the most serious cases, imprisonment. Financial and reputational implications are also significant. The cost of reactive mitigation for the most serious breaches, such as clean-ups or tankering, can potentially run into millions and risks thrusting the company brand into the spotlight for the wrong reasons.

 

Many common mistakes can be avoided by following simple wastewater treatment practices, however.

 

Maintaining your onsite equipment

Equipment failure is the cause of a majority of permit breaches, and often occurs due to a lack of maintenance.


When it comes to commercial or industrial companies, onsite effluent treatment is not necessarily seen as a core part of the operation and interest can be lacking. This can result in this vital equipment, that may underpin the efficiency of the whole site, being some of the least loved.

 

When installing new kit, WPL advises management to give the responsibility of maintaining it to specific employees who understand not only the mechanics but also the importance of the plant. Having enthusiastic champions of the equipment means it is more likely to receive the attention it deserves. Of course, with the Covid-19 pandemic leading to urgent reviews of business continuity plans, it seems good practice to assign this responsibility to a team rather than an individual, so the knowledge is not lost if one person becomes unavailable

 

Testing and trials

Performance and commercial shocks caused by discrepancies between designs and the delivery of a project can be avoided by conducting detailed reviews and pilot trials ahead of installing permanent plant. Specialist consultants perform in-depth advance testing in laboratories and by means of onsite pilot trials.

 

Industrial laboratory service

Bespoke lab-scale reviews are typically undertaken to ascertain the profile of effluent and ensure that the correct dosing regime is implemented, based on the requirements of environmental discharge permits. Process scientists will also typically carry out a separation test on effluent samples from specific sites and replicate appropriate treatment processes which an include dissolved air floatation (DAF), biological treatment and settlement options.

 

Depending on the specific consent requirements, scientists can monitor chemical oxygen demand (COD) and biochemical oxygen demand (BOD) and levels of pollutants such as greases, phosphates, nutrients and nitrates to see if they are achieving the separation required.

 

Based on these analyses, a report is then typically produced that determines the best technology and cost of the final scheme. This kind of testing is usually performed with a quick turnaround and causes little disruption to the customer whilst permitting designers to rule out different technologies and save time in researching options that might not work. 

 

Onsite pilots

Following a lab review, an onsite pilot project is usually recommended to identify the precise equipment required. Pilots allow engineers to really look closely at factors including chemical and power consumption and sludge production to give a very accurate indication of how the plant will operate and the costs, giving the customer confidence that there will be no surprises. They can seem expensive but they may save money in the long run.

 

At WPL we recently built a permanent dissolved air flotation (DAF) unit on the site of a food manufacturer who only wanted a lab review and not a pilot. It transpired the effluent being discharged was different from the sample given for lab testing – the sugar content differed vastly and could not be effectively removed.

 

Samples are variable in industrial treatment and the pilot would have picked this up very quickly, saving the customer time and money. An additional biological treatment plant has since had to be installed on the site.

 

Repurpose existing equipment

The solution to failing consent may not always require a large investment or the rebuilding of infrastructure. In many cases, just a single piece of equipment is needed, or, where an existing piece of kit fails, it can often be repurposed.

 

My company supplies a Hybrid-SAF™ biological treatment technology with custom-built cells that is frequently retrofitted into any onsite vessels, regardless of shape or size. This can improve the process to give it a 20-year life expectancy to meet consent and is significantly cheaper than rebuild projects.

 

Staff training

Solution to consent failure may not always be engineering-based, as human error can often cause breaches and give rise to the need for better staff training and reappraisal of internal policies. For example, in the food industry, breaches can occur because employees are not scraping utensils before they wash them, meaning food debris and grease washes into the public sewer – resulting in a breach.

 

Education and ongoing training can really help prevent equipment and processes breaking down, ensuring the treatment plant remains fully compliant and continues to protect the environment. Most professional wastewater solutions providers can offer advice on all of these issues and support companies who are concerned about onsite treatment facilities failing consent.

 

 

Article rating:

vote data

Leave a reply

Jacob Aarup-Andersen. (photo: )
News Editor  - 19.05.2020, 17:02

ISS Names New CEO

ISS has appointed banker, Jacob Aarup-Andersen, to succeed Jeff Gravenhorst on his retirement on 1 September 2020.

 (photo: gdtography)
Mark Gifford  - 04.05.2020, 20:53

Building Measurement and Verification in Lockdown

Mark Gifford, Technical Services Manager with global building performance specialist IES, considers the implications of Zero Running Buildings for Energy Services and FM teams during COVID-19.

Edge Hill University Campus. (photo: Edge Hill University)
News Editor  - 13.05.2020, 15:04

Celebrating Key Workers on World FM Day

Edge Hill University in Lancashire, North West England, is celebrating World FM Day today by thanking staff for their hard work during the year.

 (photo: Harris Health System)
News Editor  - 01.07.2020, 08:55

Safeguarding Homeless People with Covid-19 Testing

Harris Health System's "Health Care for the Homeless Program" has received US $1.3 million of federal funding to support SARS-CoV-2 testing and care for up to 1,000 vulnerable individuals I...

Virtual panel participants from the World Trade Organisation, UNIDO and mPedigree. (photo: )
News Editor  - 30.06.2020, 13:29

Losing Out to Industrial Automation

COVID-19 will accelerate industrial automation and allow manufacturers in developed countries to compete effectively with lower labour cost markets, according to panel discussion participants from...